Adding your Weel card to Apple Wallet or Google Pay lets you tap and pay in-store instantly — no physical card needed. Once set up, your Weel card works at most merchants that accept Tap and Go.
You can add your Weel card to Apple Wallet directly from the Weel mobile app.
Before you start
Ensure you are logged into the Weel mobile app
Make sure your mobile number can receive SMS verification codes
-
Your device must support Apple Wallet
Apple Wallet is only supported on iPhone 6 and above. iPhone 5 and earlier models are not compatible with Apple Pay.
To begin:
Open the Weel mobile app
Go to the Card tab
-
Tap the banner “Your Weel card is ready to set up”
Tap Add to Apple Wallet
When the Apple Wallet flow opens, tap Next
Review and accept the Terms and Conditions
On the card verification screen, select Text Message, then tap Next
Apple Wallet will send a verification code via SMS - enter this verification code
When prompted, tap Set PIN
Another verification code will be sent to your mobile device - enter the this through
Enter your new PIN and confirm PIN by re-entering the same PIN
Tap Submit
What happens next?
Your Weel card will appear in your Apple Wallet and is ready to use straight away. To make an in-store payment, open the Apple Wallet app, select your Weel card, and hold your phone over the card reader.
You only need to do this once — your card will remain in Apple Wallet unless it's removed manually.
- Note: A PIN may be required for purchases over $100. If you need to set up or change your PIN, go to the Card tab in the Weel app, tap the cog icon in the top right corner, and select Manage card PIN.
- Received a physical card? Your virtual card details will change when a physical card is issued. You'll need to remove the old card from Apple Wallet and re-add your new card using the steps above.
Related Articles